User guide

Universal Fiber Optics
6
INSTALLATION GUIDE (Continued)
CONNECTION
OPERATION
There are 2 main connections required - the fiber port and the line power supply. On
units with a separate electrical feed to the color wheel, 2 mains power connectors
are required. Connect and secure the fiber optic connector to the fiber port before
connecting the electrical supply. Never run the illuminator with the fiber connector
unplugged.
Switch on the power to the illuminator and it will start up automatically. Light will
be output from the port connector and throughout the fiber harness. On models
with a switch controlled effects wheel or a separate electrical feed to the effects
wheel, the rotation of the effects wheel can be independently switched on or off. On
other models the effects wheel will rotate continuously.
If no light is produced, please consult the TROUBLESHOOTING section in this
manual
Fiber connector
Power cable