User guide
Universal Fiber Optics
6
INSTALLATION GUIDE (Continued)
CONNECTION
OPERATION
There are 2 main connections required - the fiber port and the mains power supply.
Connect and secure the fiber optic connector to the fiber port before connecting the
electrical supply. Never run the illuminator with the fiber connector unplugged. For
separate feed units, there will be additional power connections required.
Aer installing and connecting the illuminator as described above, all you have to
do is turn the power on. The lamp will take 3-4 minutes to reach full brightness. This
is normal for this type of illuminator.
If no light is produced, please consult the TROUBLESHOOTING section in this
manual