User guide

Compact DMX+ Illuminator Range
9
OPERATION (Continued)
The DMX+ illuminator has two modes of operation.
STANDALONE MODE
In standalone mode, the Compact DMX+ can be used in two ways - either as a single
independent illuminator or in master/slave configuration with several illuminators
connected together using DMX cables.
In master/slave configuration all addresses are set the same and whatever program is
selected on the master unit will also be executed on the slave units.
DMX MODE
Illuminators set in DMX mode can either be controlled by another Compact DMX+ in master
mode, or by a standalone DMX controller.
PROGRAMMING THE DMX+
The DMX+ can be programmed for various functions and modes from the rear panel controls
as shown on the following pages.