User guide

Compact DMX Illuminator Range
1
INTRODUCTION
Thank you for purchasing this UFO illuminator.
Please read these instructions fully before connecting your unit to the electrical
supply, and keep them for future reference.
The UFO Compact DMX are a range of low profile illuminators which use 150W metal
halide discharge lamps to give much greater brightness than those powered by
halogen lamps.
These models have a fast re-lamping feature (the lamp is mounted on a pull out
hatch at the rear) and are fitted with a DMX controller allowing a range of in-built
effects or control via a standalone controller.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED
IMPORTANT
Do not operate without complete lamp enclosure in place or if lens is damaged.
KEEP HARNESS IN PLACE WHEN IN OPERATION.
CAUTION: Hot surface. Keep away from curtains and other combustible materi-
als.
WARNING: RISK OF FIRE/INJURY TO PERSONS. Keep away from
combustibles. Unplug to change lamp. Do not touch lamp.
WARNING: RISK OF FIRE. Do not place lamp where the overhead surface is closer
than 0.2m to the illuminator.