Guide

13
Laser Engraving Kit
(Only for Pro)
Laser Power
500mW
Working Voltage/Current
12V/5A
Wave Length
405nm
Weight
140g
Dimension(L*W*H)
55mm*33mm*88mm
Materials to Engrave
Wood, Plastic, Leather, Feather,
Paper, etc.
Application Information
We would introduce several ways to play with the robot arm in different platform.
1.Send Command over USB Cable
Power on the uArm and open the Arduino IDE. And setting the board like the picture below. Please
make sure the port you are choosing is the correct port of uArm.