User Manual

verify proper operatioN of comBuStioN equipmeNt
 • Toverifythatequipmentisoperatingasthemanufacturedesignedittowork.Thisincludesinstallation
  testsforCO,CO2,O2,ExcessAirandstacktemperatures
- A properly tuned combustion appliance will perform better, and reduce the likelihood of
call-backs for no-heat
 • Toverifythatthemaintenanceworkperformedhascorrectedtheproblem
 • Todetectanydefectsearly–possiblyatinstallation
   -Higherefficiencyequipmentisrunningatpeakonlywhenproperlyadjusted.Asthecomplexity
of a system increases, so does the importance of proper adjustment of the combustion process.
 • Improperly adjusted equipment not only fails to meet expected performance but could lead to future failures
 • Tocheckthattheequipmentissuppliedwithenoughcombustionair,make-upairandhasproper
venting to exhaust the combustion by-products
 • Toestablishabase-lineofdesiredperformance
- By tracking the performance over time you are able to see changes before they lead to
equipment failure.
verify Safe operatioN of comBuStioN equipmeNt
 • Equipmentthatisnotproperlyadjusted,orthathasinsufficientdrafttoventcombustiongasescould
produce carbon monoxide in deadly quantities.
 • Whencustomerscomplainaboutfumesitisusuallyanindicationofimproperoperation.COisa
colorless, odorless gas so the fumes are not the CO, but an indication that a problem may exist.
improve your productivity & profit
 • TheUEiSmartBell pluS combustion meter gives a quick, continuous readout of the combustion process.
Readings change in real-time as adjustments are made to help zero in on the proper setting. Compare
this to spot tests or other methods, and you will see your productivity rise.
 • Propertestingwillhelpyouprovidetheproperserviceorequipmentreplacement
  recommendations,andhavethedatatosupportthis.Saleswillincreasebecauseyouarenolonger
guessing, and the work provided is proper for the needs of the customer.
 • Customersonaservicecontractwillbeprovidedexcellentservice,andyouwillquicklydiagnosefailures
and help keep the equipment up for the season.
improve cuStomer perceptioN of your ServiceS
 • Provideyourcustomersresultsoftheperformanceoftheirequipment
 • Reduceyourcustomersenergyexpensebyproperlyadjustingandmaintainingtheirequipment
 • Increaseyourconfidenceintheworkperformedandremember
if you doN’t teSt, you doN’t KNow
WHY TEST WITH SmartBell pluS™
5