Owner manual

KM9106 Operators Manual
35
The above example will send the Time and Oxygen reading to the printout every two
minutes.
To stop the Quintox Auto printing or logging, select Auto print OFF above and return
to the main displays.
7.2.1 Standard Printout - Parameter Options Used:
LINE
NUMBER
PARAMETER
USED:
(MAX LINES: 40) & STATUS:
1 - - - - - - - - - - - - PRINTOUT START
2 BLANK LINE
3 ***KANE-MAY*** MANUFACTURER ID
4 **KM QUINTOX** ANALYSER ID
5
BLANK LINE
6 DATE 02-01-97 DATE
7 TIME 18 :14:35 TIME
8 BLANK LINE
9 NATURAL GAS FUEL SELECTED
10 BLANK LINE
11 02 % ......20.9 FLUE GAS 0
2
CONTENT
12 CO ppm .....0.0 FLUE GAS CO CONTENT
13 Prs mbar ....0.05 PRESSURE MEASUREMENT
14 EFF %.....FAULT COMBUSTION EFF CALC
15 BLANK LINE
16 XAIR O2>20% FLUE GAS EXCESS AIR
17 C02 %.......0.0 FLUE GAS CO
2
CALC (CO2m% FLUE GAS
CO
2
MEASURE)
18 CO/CO2 R....0.00 CO/CO
2
RATIO
19 PI % .....0.00 POISON INDEX
20 NO ppm.....0 FLUE GAS NO CONTENT
21 NO2 .....0 FLUE GAS NO
2
CONTENT
22 NOx ppm.....0 NOX CALCULATION
23 SO2 ppm.....0.0 FLUE GAS S0
2
CONTENT
24 CxHy % ...... 0.0 HYDROCARBON READING
25 BLANK LINE
26 NETT C 0.0 NET FLUE GAS TEMP
27 FLUE C 21.0 ACTUAL FLUE GAS TEMP
28 INLT NOT
FITTED
BOILER INLET TEMP
29 AMBIENT C 16.9 AMBIENT AIR TEMP
30 - - - - - - - - - - - - DOTTED LINE
Not all parameters are used. See the master list on the next page if more are required.