User Guide

DL479
NCV
°C°F
CAT IV 600V
CAT III 1000V
MAX
µA
A
CAT Ill
1000V 600A
True RMS
Hz / Duty
MAX/MIN
AC/DC Voltage: <750V AC/600V DC
• Default =
• Press x1 =
WARNING
• Use CAT III rated Test leads or higher.
• Do not attempt to measure more than 750V AC/600V DC.
• Keep hands below line when measuring high current levels.
• Do not exceed 600 volts AC or DC – RMS at either the common or
multifunction input ports as measured from earth ground.
Select AC or DC Voltage.
WARNING
• High Voltage indicator will display and audible alert will sound over 600V
AC/DC and High Voltage indicator will display (without audible alert) over
30V AC/DC.
Features:
DC Volts
Range Resolution Accuracy Overload Protection
600mV 0.1mV
±(0.5% +4 dgts) 1000V RMS
6V 1mV
60V 10mV
600V 100mV
AC Volts (45Hz to 400Hz)
Range Resolution Accuracy Overload Protection
600mV 0.1mV
±(1.0% + 3 dgts) 1000V RMS
6V 1mV
60V 10mV
600V 100mV
750V 1.0V
True RMS Frequency Range: Square 50Hz to 100Hz
Sine 50Hz to 400Hz
Bandwidth: Sine = 0.5% error at 1.5kHz (max)
Square = 0.5% error at 0.1kHz (max)
Triangle = 0.5% error at 1.2kHz (max)
DL479
NCV
°C°F
CAT IV 600V
CAT III 1000V
MAX
µA
A
CAT Ill
1000V 600A
True RMS
Hz / Duty
MAX/MIN
Range Resolution Accuracy Overload Protection
600Ω 0.1Ω
±(0.8% +3 dgts)
600V RMS
6kΩ 1Ω
60kΩ 10Ω
600kΩ 100Ω
6MΩ 0.001MΩ
60MΩ 0.01MΩ ±(1.2% +3 dgts)
Resistance: <60MΩ
Features:
WARNING
• Do not measure resistance on a live circuit.
• Default =
• Press x1 =
• Press x2 =
• Press x3 =
• Buzzer sounds at less than 40Ω.
WARNING
• Do not measure resistance on a live circuit.
Features:
Open Circuit V Response Time Overload Protection
<1.0V <50ms 600V RMS
• Default =
• Press x1 =
• Press x2 =
• Press x3 =
Continuity
DL479
NCV
°C°F
CAT IV 600V
CAT III 1000V
MAX
µA
A
CAT Ill
1000V 600A
True RMS
Hz / Duty
MAX/MIN
M