User guide

LCD Display Functional Description
1. Primary Display: (DT301: T1 reading)(DT302: T1-T2 reading)
2.
TYPE KJET: Type of thermocouple.
3.
SETUP: Setup is in progress.
4.
RECALL: The logged readings are displayed.
5.
OFFSET: The thermocouple measurement includes an offset.
6.
HOLD: The display readings do not change.
7. LOW BATTERY: Replace batteries.
8. USB: The thermometer is connected to a PC via USB
interface port.
9.
LOG: Readings are being logged.
10.
˚C,˚F, K: Temperature units.
11.
Secondary Display: Internal temperature of the thermometer,
MEMORY, MIN, MAX, AVG, and T1 or T2 (DT302)
reading. Shows the memory location initially when a logged
reading is recalled.
12.
Time Display: 24-hour clock, shows the INTERVAL length in
SETUP. Shows elapsed time when AVG is on or before clock has
been set. Shows the memory time later on when a logged
reading is recalled.
3
1
2
3 4 5 6 7
8
9
10
11
12