INSTRUCTION MANUAL CD100A 1-800-547-5740 • Fax: (503) 643-6322 www.ueitest.com • email: info@ueitest.
Introduction International Symbols The CD100A Combustible Gas Leak Detector is capable of sensing many combustible, non combustible and toxic gases that include but are not limited to the following: Acetone Alcohol Ammonia Benzene Butane Ethylene Oxide Gasoline-Petrol Halon Hydrogen Sulfide Industrial Solvents Jet Fuel Lacquer Thinners Methane Naphtha Natural Gas Propane Refrigerants Toluene NOTE: This leak detector is factory calibrated for methane in air. Operating Instructions 1.
Battery Replacement 1. Turn off the power and remove the battery case cover. 2. Remove and dispose of old 9V alkaline battery promptly in a manner consistent with disposal regulations. Always use a 9V alkaline battery. Ensure the polarity of the battery matches that shown in the compartment. 3. Replace the battery case cover.
CD100A Combustible Gas Leak Detector Limited Warranty The CD100A is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If within the warra n ty period your instrument should become inoperative from such defects, the unit will be repaired or replaced at UEi’s option.
