Owner manual

verify proper operatioN of CombuStioN equipmeNt
 • Toverifythatequipmentisoperatingasthemanufacturerdesignedittowork.
  ThisincludesinstallationtestsforCO2andCO.
- A properly tuned combustion appliance will perform better, and reduce the likelihood of
call-backs for no-heat.
 • Toverifythatthemaintenanceworkperformedhascorrectedtheproblem.
 • Todetectanydefectsearly–possiblyatinstallation.
   -Higherefficiencyequipmentisrunningatpeakonlywhenproperlyadjusted.Asthecomplexity
of a system increases, so does the importance of proper adjustment of the combustion process.
 • Improperlyadjustedequipmentnotonlyfailstomeetexpectedperformancebutcouldleadtofuture 
failures.
 • Tocheckthattheequipmentissuppliedwithenoughcombustionair,make-upairandhasproper
venting to exhaust the combustion by-products.
 • Toestablishabase-lineofdesiredperformance-
   -Bytrackingtheperformanceovertimeyouareabletoseechangesbeforetheyleadtoequipment
failure.
verify Safe operatioN of CombuStioN equipmeNt
 • Equipmentthatisnotproperlyadjusted,orthathasinsufficientdrafttoventcombustiongasescould
  producecarbonmonoxideindeadlyquantities.TheUEiC20canbeusedtotestbothfluegasand 
ambient CO.
 • Whencustomerscomplainaboutfumesitisusuallyanindicationofimproperoperation.COisa
colorless, odorless gas so the fumes are not the CO, but an indication that a problem may exist.
improve your produCtivity & profit
 • TheUEiC20 combustionset-upmetergivesaquick,continuousreadoutofthecombustionprocess.
Readings change in real-time as adjustments are made to help zero in on the proper setting.
Compare this to spot tests or other methods, and you will see your productivity rise.
 • Propertestingwillhelpyouprovidetheproperserviceorequipmentreplacement recommendations,
  andhavethedatatosupportthis.Saleswillincreasebecauseyouarenolongerguessing,andthe 
work provided is proper for the needs of the customer.
 • Customersonaservicecontractwillbeprovidedexcellentservice,andyouwillquicklydiagnose
  failuresandhelpkeeptheequipmentupfortheseason.
improve CuStomer perCeptioN of your ServiCeS
 • Provideyourcustomersresultsoftheperformanceoftheirequipment
 • Reduceyourcustomersenergyexpensebyproperlyadjustingandmaintainingtheirequipment
 • Increaseyourconfidenceintheworkperformedandremember
if you doN’t teSt, you doN’t KNow
WHY TEST WITH THE C20
5