Install Instructions

9
USING THE MENU
Select “Menu” on the rotary switch and navigate using the function buttons:
NOTE: To “EXIT” the “MENU” at any time simply move the rotary switch to any position other than “Menu”. Any changes that have not been
“entered” will be ignored.
MENU SCREEN
MENU OPTIONS/COMMENTS
LOGS VIEW, EXIT, DELETE ALL
CODE 000000 (PASSWORD PROTECTED FOR AUTHORIZED
SERVICE PERSONAL ONLY
TIME HH:MM:SS
DATE MM:DD:YY
HEADER LINE 1, LINE 2, BACK
IR PRINT KMIRP, IRP-2/3
˚C/˚F ˚C or ˚F
GAS UNIT ppm, mg/kWh, mmg/m3
LANGUAGE ENGLISH, FRANCAIS, ESPANOL
EFF GROSS, NETT
O2 REF CO %
The Menu position on the Rotary Dial allows for the customization of the default settings for the analyzer as per the user’s
requirements. Navigation through the Menu system is via the dedicated user’s interface buttons (Up, Down, Enter).
As you navigate up or down through the Menu, the items will scroll accordingly, eventually back to the beginning.
Rotate Selector Dial to MENU to set up or customize your settings.
Selected parameter are centered, highlighted with arrow icons on either side.
Use
and buttons to scroll menu options.
Press to a select a parameter to edit. Press button to scroll fields to change.
Press and buttons to change field contents.
Press to enter content selected.
The analyzer will perform a 60 second purge in Rotary Dial setting of AUX, O2/Eff, CO/CO2. This should be done in fresh air.