Install Instructions

18
ANALYZER SPECIFICATIONS
PARAMETER RANGE RESOLUTION ACCURACY
Temp Measurement
Flue Temperature
Inlet Temperature
(Internal sensor)
Inlet Temperature
(External sensor)
32°-1112°F
32°-122°F
32°-1112°F
0.1°F
0.1°F
0.1°F
±3.6°F
±0.3% reading
±3.6°F
±0.3% reading
±3.6°F
±0.3% reading
Flue Gas Measurement
Oxygen
*
2
Carbon monoxide
*
1
Carbon dioxide
*
1
Efficiency (Net or Gross)
*
2
Efficiency High (C)
*
2
Excess Air
*
2
CO/CO
2
ratio
*
2
0-21%
0-20ppm
21-2,000ppm
Above 2000ppm
Purge pump
operates
0-20%
0-99.9%
0-119.9%
0-250%
0-0.999
0.1%
1ppm
0.1%
0.1%
0.1%
0.1%
0.0001
±0.3%
±3ppm
±5% reading
unspecified
±0.3% volume
±1.0% reading
±1.0% reading
±0.2% reading
±5% reading
Nitric Oxide Sensor
(optional)
0 to 100ppm
Overrange to 1500ppm
1ppm + 2ppm <30ppm
*
1
+5ppm <100ppm
*
1
+5% reading >100ppm
Pressure (differential)
Nominal range 32”
Maximum over range without
damage to sensor is 60”
±0.2 mbar (±0.080 inWC)
±1 mbar (±0.401 inWC)
±80 mbar (±32 inWC)
Maximum 0.001 mbar
<25 mbar
(0.001 inWC < 10.016)
±0.005 mbar (±0.002 inWC)
±0.03 mbar (±0.080 inWC)
±3% of reading: same
Pre-programmed Fuels NAT GAS, H OIL, PELLLETS, L OIL, LPG, BUTANE, PROPANE
User programmed Fuels 5 user defined fuels
Storage Capacity 30 Total Tests
*1 Using dry gases at STP
*2 Calculated