Install Instructions

4
ANALYZER OVERVIEW
A. Infrared Printer Port
B. On/ Off (Power) Button
C. 6 Line Backlit Display
• Press any button to turn Back light on (will turn off after 10 seconds of inactivity)
D. Protective Rubber Boot With Magnets
E. Status Bar
F. Data Hold Button: Short press to hold current data
G. Pump Toggle Button: Long press to toggle pump on and off
H. UP Button
• Short press to navigate “UP”
I. Save Log Button: Long press to store data
J. Print Report Button: Short press to a report (will enter a print option if both Wireless Module is fitted)
K. Down Button
• Short press to navigate “DOWN”
L. Enter Button: Long press to store data
• Short press select current option displayed
• Long press to activate some menu items
M. Rotary Selector Dial
N. Particle Filter (inside water trap)
O. Water Trap
P. LED Water Trap Full Indicator
Q. Serial Number: (under protective boot)
R. Sensors Fitted: (label under Protective Boot) Indicates Sensors fitted in unit
S. Battery Compartment: (under Protective Boot)
T. Grip Indentation: Indentation for fingers to grip analyzer
U. Water Trap Drain Plug (Red plug; take caution NOT to damage plug when removing protective boot)
V. Battery Charge USB Adapter Connection
W. Temperature Connections
• Flue Probe Temperature: T1
• Inlet Temperature: T2
X. Flue Gas Inlet Connection
Y. Pressure Ports (C163 & C164 Only)
• Pressure Port 1
• Pressure Port 2
SYMBOLS
Low battery Degrees Fahrenheit
Degrees Celsius Pump Status
Pump Start Pump Stop
Hold Printing
Navigate Down Navigate Up
Enter Key Save Log