Install Instructions

11
Menu Items
MENU Sub Menu OPTIONS/COMMENTS
Time
HH:MM:SS
24 Hour Format (e.g. 7AM = 0:00:00, 7PM = 19:00:00)
Date
DD/MM/YY
Header
LINE 1
Customer info displays on print outs
LINE 2
Customer info displays on print outs
EXIT
IR Print
KMIRP
Select to print to KMIRP
IRP-2
Select to print to IRP-2
Temperature Scale
˚C
Select ˚F or ˚C.
˚F
Gas Unit
ppm
ppm(n)
mg/m3
mg/m3(n)
mg/kWh
mg/kWh(n)
Language
English
Espanaol
Francais
Efficiency
Gross
Nett
O2 ref Used for "Normalized" readings. Default set to 3%, can be adjusted up or down.
Logs
VIEW
View current memory usage and view stored Logs
DELETE ALL
EXIT
Code Password protected for authorized service agents only/ LEAVE SET TO "0000".
STORED LOGS MEMORY
The UEi utilizes a shared memory system much like a computer hard drive. The different Log types are stored sequentially until the
shared memory area is full. This means the Log types are not restricted to a smaller number of memory locations as the full memory
capacity is available as required for Logs of any type.
To view the current memory usage status simply navigate to menu -----> LOGS, press the button to select the Log desired.
Number of stored Combustion Logs
Number of stored Auxiliary Logs
Number of stored Temperature Logs and “Pressure if fitted”
Total Memory Used
Menu Options
To veiw entire Log, results must be printed to App or through IR printer.
View stored Logs, this will enter the secondary menu to select the type of log to view (will only
appear if data available). (Results must be printed to app or through IR printer)
Delete all stored Logs. To delete “long press” the button (will only appear if data available).
Exit back to the Main Menu
STATUS
FLUE 1
AUX
FLUE 2
TEMP
C
o
m
b
u
s
t
i
o
n
A
n
a
l
y
z
e
r
C161
C
O
C
O
2
T
E
M
P