User Manual

Note:
Forpoint-to-pointinstallation,thelineofsightofthe2wirelessbridge
bracketsmustbeclearandcannotpassthroughthewall.Thesignal
transmissionangleofthebridgeis60degrees.Forpoint-to-multipoint
installation,theangleoftheslavebridgeneedstobeadjustedtoensure
thatitiswithinthe60-degreesignalrangeofthemainbridge.Theantenna
polarizationdirectionishorizontal60°/vertical30°.
5.WiFiFunction
1.TheWiFifunctionisturnedonbydefaultforthemasterbridge.
WiFiSSID:CPE5G-5GXXX
WiFiPWD:zllinkcpe123456XXX
XXXrepresentsdifferentchannels,pleaserefertothecomparisontablein
theusermanual.
2.YoucanaccessthewirelessbridgethroughyourcomputertosettheSSID
andnewWiFipassword.Pleaserefertotheadvancedsettingssection.
3.ConnectthePoEadapterPoEtoCPE,andLANtoCamera,PC,Routeror
Switchbasedonthenetworktopology.TheroleofPoEistoprovidepower
anddatatransmissionforCPE.
4.ThemasterCPE’sPoEadapter’sLANconnectionmonitorstheInternet,and
theslaveCPE’sPoEadapterLANconnectscamerasorroutersandother
equipment.
[e-mail]
07