User Manual

QuickStart
1.PoEPowerSupply
TheCPE850wirelessbridgeadoptsaPoEpowersupply,whichiseasytoinstall
andmanagewhilesavingcosts.
1.1.Accordingtotherequirements,preparealongenoughnetworkcable
（ Recommendedwithin20meters,mustCat5eorup）toconnectthe
wirelessbridgeandthePoEpowersupply.ThePoEportofthePoEpower
supplyisconnectedtotheWANportofthewirelessbridge.
1.2.TheLANportofthePoEpowersupplyisconnectedtothePC,router,and
switch.
2.PointtoPointPairingStep:
1.SwitchoneunittoA(MasterBridge)andoneunittoB(SlaveBridge);
2.ConnectthePOEtoeachunitusingtheEthernetcableandplugthePOEin;
3.Waitforthemtopowerup,about2min;
4.Usethetinyresetbuttontoclickthroughuntilyougetachannelwithaletter.
1,2,3,...,A,B,C,...,F,hereusedC;
5.Thenontheotherunitdothesame.Bothunitsneedtobeonthesame
channel;
6.Waitfor2-5minutestocompletethepairing.Whenthenumberofthedigital
tubeissolidandthesignallightonthesideturnson,itmeansthepairingis
successful;
7.Finallyconnectotherdevices(Router,PC,Switch)andinstallthemtothe
targetlocation.
[e-mail]
05