User Manual

2.Modifyyourcomputer'sIPaddress,
makeyourcomputer'sIPandthe
bridge'sIPaddressbeonthesame
networksegment(LAN)sothatyou
canaccessthem.
Step1:Findandopen"OpenNetworkandSharingCenter"onyourcomputer.
Tips：clickthenetworkiconinthelowerrightcornerofthecomputer.
Step2：Findandopenthe"Changeadaptersettings",select"LocalArea
Connection"toright-clicktoopenthenetworkproperties.Refertothe
pictureabovetoopen.
Step3:Findanddouble-clickopenthe"InternetProtocolVersion4(TCP/IPv4)",
choosethe"UsethefollowingIPaddress"andenterIPaddress,subnet
mask,Defaultgateway,PreferredDDSserver.
3.Changeyourcomputer'sIPaddressto192.168.255.xxx(192.168.255.xxx
cannotbethesameastheIPoftheCPE),thenentryIPaddressis
192.168.255.xxx,subnetmaskis255.255.255.0(Autofill),Defaultgatewayis
192.168.255.xxx,PreferredDDSserver192.168.255.xxx.Youcanuse
192.168.255.2(xxx=2)inthereferencepicturetoset.
192.168.255.105
10
[e-mail]