Operation Manual

english
C
EN-42 EN-43
english
C
Operating the unitOperating the unit
This can be set off by an irregular heartbeat (arrhythmia),
disturbances caused by movement, talking or even
breathing in deeply. The symbol is stored with the respective
measurement.
Measurement results accompanied by ashing pulse
displays should therefore be viewed as critical and
repeated under more favourable conditions.
If the “ ” symbol for irregular pulse waves ashes after
a measurement, the unit has recorded irregular pulses
during the measurement.
Press the Memory button to call up data. The average
value of the stored results is displayed with “A”, the values
for systole, diastole and pulse and the pulse pressure (PP)
are shown alternately in the display.
The stored data remain visible in the display for around 30
seconds. The unit then switches itself off.
11. Irregular pulse waves and cardiac
arrhythmia
Press the Memory button repeatedly to call up further
measured values.
If the symbol appears more frequently, this may be caused
by an irregular heartbeat and must be discussed with your
doctor!
12. Using the memory
Measured results are automatically stored in the memory. The memory can store
up to 60 results and the average value. When more than 60 measured values have
been stored, the oldest value (No. 60) is deleted to allow the latest value (No. 1)
to be recorded.
When the Memory button is pressed again, the value
measured last (No. 1) appears. When the date/time
function is activated, systole, diastole and pulse are
displayed alternately with memory number and date,
followed by the pulse pressure (PP) and the time.