Operation Manual
English
English
EN-62 EN-63
Maintaining the device
F
Technical information
E
Technical equipment and batteries do not belong in
household waste. They must be disposed of at appro-
priate collection and disposal points.
7. Disposal • Keep the device clean. Check for cleanliness after use. Please
use a soft, dry cloth for cleaning. Do not use benzene, thin-
ners or other strong solvents.
• The cu may absorb sweat and other uids. Inspect the cu
for marks or discolourations after each use. Please use a
synthetic detergent for cleaning and carefully wipe the sur-
face. Do not scrub or machine-wash. Air-dry thoroughly.
• Take care when storing the device. Ensure that no heavy
objects are resting on the device or the cu and that the air
hose is not kinked. Do not wind the air hose too tightly.
• To separate the cu from the main device, please do not pull
the air hose, but grip the air connector and gently pull it o.
• Do not apply force when folding or bending the cu.
• If the device was stored at temperatures below 0°C, allow
it to stand at room temperature for at least 1 hour before
using it.
• If the device is not to be operated for an extended period of
time, please remove the batteries. Store the batteries out of
the reach of children.
• Make sure that liquid cannot get into the air hose.