Operation Manual

E
EN-58
english
Technical information
EN-59
english
E
Technical information
Serial number: The unit bears a serial number SN which provides clear identification.
Power supply: Battery type: 4 x 1.5 V AA alkali manganese (LR 6) or lithium (FR 6) round cells, service life:
more than 800 measurements in 2 years
Optionally stabilised type A1 mains adapter, output 6 VDC, minimum 600 mA
Cuff: Cuff VM5 (for arm circumference 22-32cm) or optionally
cuff VL5 (for arm circumference 32-42 cm)
Operating conditions: Ambient temperature 10 to 40 °C, relative humidity up to 85 %, non-condensing
Storage and transport
conditions:
Ambient temperature -20 to +50 °C, relative humidity up to 85 %, non-condensing
Air deflation valve: Electronically controlled
Automatic switch-off approx. 3 minutes after end of measurement
IP code: IPX0 not protected
Technical data3.
Original spare parts and accessories:4.
Subject to technical modifications.
Cuff 22-32 cm type VM5
Part. no. 2505001
PZN 9101599
• Mains adapter type A1
Part. no. 2501020
PZN 0179482
•Cuff 32-42 cm type VL5
Part. no. 2505002
PZN 9101607
•
Unit type: Digital automatic unit with electric pump for measuring blood pressure on upper arm
Dimensions: L = 100 mm x W = 152 mm x H = 61 mm
Weight: 295 g not including batteries
Display: LCD display (liquid crystal display) for measured values and check displays
Memory: 60 measured values (stored automatically) and average value (A)
Measurement
procedure:
Oscillometric determination of systole, diastole and pulse
Reference procedure
of clinical testing:
Auscultatory measurement
Inflating pressure: Initially up to approx. 180 mmHg, then in stages of 30 mmHg
Pressure display
range:
0-300 mmHg
Measurement range Systolic: 50-250 mmHg
Diastolic: 40-150 mmHg
Pulse: 40-160 pulses/min
Error limits: Blood pressure measurement: corresponds to EN 1060 Part 3
Pressure measurement: ± 3 mmHg
Pulse measurement: ± 5%