Operation Manual

EN-58
english
Operating the unit
C
EN-59
english
Operating the unit
C
Set the month with the Memory button
and confirm this with the Start/Stop
button. Set the day, hours and minutes in
the same way.
Changing the date/time
To change the date/time function, take out a battery and wait until the
display goes blank. Now you can reactivate the date/time function and reset
the values.
Deactivating the date/time function
To deactivate the date/time function, press the Start/Stop button and then
immediately the Memory button.
When the date/time function is activated, the time is also
shown in the display when the unit is switched off.
Attaching the unit6.
The special double-preformed comfort cuff is easy to attach and provides for
a perfect fit during measurement. The materials used have been tested for
skin compatibility in accordance with ISO 10993.
Expose your wrist, with the palm of your hand facing upwards.•
Slide the unit over your wrist. Make sure the
gap between your wrist and the top edge of
the cuff is approx. 1 cm.
•
Now pull the free end of the cuff tight and
close the cuff with the Velcro-type fastener.
•
Thanks to its optimised shape, the cuff fits very tightly to prevent measure-
ment errors.