Operation Manual

EN-54
english
Operating the unit
C
EN-55
english
Operating the unit
C
Important instructions for use3.
Refrain from drinking alcoholic or caffeinated beverages and smoking at
least one hour before measuring.
Please rest at least 5 minutes before measuring. Depending on the
previous degree of stress/exertion, this can even require up to one hour.
Expose the wrist, clothing or a watch/jewellery must not impair the
blood flow in or from the arm as this influences the blood pressure at
the measurement point.
There should be no irregular heartbeats during the measurement! Ir-
regular movements, vibrations, speaking, and breathing heavily will also
affect the measurement.
It is absolutely essential to sit still and remain quiet. Irregular move-
ments, vibrations (shaking), talking and breathing heavily will affect and
may even falsify the measurement. Look out for irregular pulse signals
in the display; if necessary, repeat the measurement under more favour-
able conditions.
Unusual measurement results are possible with all automatically meas-
uring blood pressure measurement systems from time to time. Check
yourself: did you comply with the instructions for use above? If neces-
sary, repeat the measurement after allowing the blood circulation in the
arm to recuperate briefly; rest for about 3-5 minutes for this purpose.
Tip: Remain seated, your monitor will switch off automatically about
3 minutes after a measurement. Afterwards, we recommend that you
repeat the measurement.
Blood pressure is not a fixed value. It may fluctuate upwards or down-
wards by more than 20 mmHg on patients within a few minutes.
For this purpose, sit at a table (if possible the height of a dining table,
not a coffee table!).
-
Body posture must be relaxed:
Rest your back against the backrest of the chair.-
Support your forearm so that the cuff is at the same height as your
heart.
-
Place your feet on the floor and do not cross your legs.-