Owners Manual

75
6.7.3 Motor drive
Motor drive checks whether the motor operates normally in manual mode.
i. Remove the fiber from the splicer.
ii. Select “Motor drive” with button.
iii. Change the motor selection by pressing . The name of the
selected motor is indicated at the top of the screen.
iv. Operate the motor in a direction wanted by pressing .
Motor
X/Y Makes fiber go bottom Makes fiber go up
ZR Makes right fiber go backward Makes right fiber go forward
ZL Makes left fiber go forward Makes left fiber go backward
S Moves step by step upon every press of the button.
M Continuously moves upon pressing the button.