Owners Manual

47
6.1 Splice
To display splice mode, press and select “Splice” menu with button. It
displays a screen to select splice mode as follows. The screen has a list of splice
modes to facilitate a user’s easy selection and use of splice mode. In addition, splice
mode can be expanded and saved up to 300 modes. These splice modes are classified
into general mode and user-defined mode.
 General splice mode: No. 1~27
 User-defined splice mode: No. 28~300
[ Splice modes summary]
Splice mode Description
SM
For basic SM fiber. MFD of single mode fiber is about 9~10
µm
at 1310nm wavelength.
NZ
For NZDS fiber. MFD of NZDS fiber is about 9~10
µm at
1550nm wavelength. WDM fiber can also be spliced on this
mode.
DS
For DS fiber. MFD of DS fiber is about 7~9
µm at 1550nm
wavelength.
MM For MM fiber. Core diameter of MM fiber is about 50~62.5 µm .
Other
Other splice modes are saved on the database of Swift KF4A.
New splice modes are currently being updated. Therefore, we
recommend that users keep upgrading the equipment
regularly by contacting Ilsintech.