Owners Manual

26
When the blade is adjusted to the proper height, tighten the set screw of slide.
The height adjustment of the blade is closely related to cleaving quality . Make
sure you perform height adjustment with BHS-01, sold separately.
Please contact customer service for the information and availability of BHS-01.
4.8 KF4A Sleeve-Heater
The sleeve heater of KF4A reinforces spliced point of the single fiber.
The quality of fusion splicing on the fiber should be good.
Fiber that sleeve tube is inserted to heater should be properly aligned and installed.
Heater cover should be closed while heater is on.
Cable diameter Φ250㎛, Φ 900㎛, Φ 2.0㎜~ Φ 3.0㎜
Sleeve length standard 32mm
Sleeving time 20~35 sec
Temperature range 130°C ~ 200 °C
i. Open up the heater cover to start.
ii. Place the sleeve tube on the spliced point. Make sure center of the sleeve