Manualshelf

Owners Manual

ManualsBrandsUCL Swift ManualsDatacom ToolsFusion Splicer Kt, Integrated 5 Function in One Unit
21222324252627282930
Table Of Contents
21
4.7 Fiber cleaving
The automatic cleaver of KF4A cleaves by 90 degree angle cleaving with a single fiber.
Stripping should be in a proper condition.
Fiber alignment in the holder must be in an appropriate condition.
The blade condition and height of the blade at the cleaver should be maintained in a
proper manner.
i. Open the cover and set the holder with the fiber on the holder base and align
the stripped fiber straight over the blade, Check the alignment of the fiber.
<Φ250 type> <Connector type>
ii. Cleave the fiber by pressing the cover.
<Φ250 type> <Connector type>