Owners Manual

19
4.5.1 Maintenance
(1) Blade replacement and adjustment
i. Remove the blade by unscrewing the bolt as shown in the figure when its fails
stripping. Removal should be done after moving the slider and it stays to the
left position.
ii. Assemble a new blade in reverse order of the disassembly process. (composed
as 1 pair of each piece both at the top and the bottom)
Setting and stripping can be done properly with no on the both top and bottom.
(2) Product handling and storage
i. As the main parts (blade, heater etc.) are closely related to the product’s life,
be careful with its use, during transportation and storage.
ii. Do not apply excessive force or shock when handling the product.
iii. Keep the main parts clean at all times of use by using a brush.
iv. Maintain the product clean at all times.