Owners Manual

17
4.5 Fiber stripping
Automatic stripper of KF4A automatically performs accurate stripping with single fiber.
This thermal stripper does not incur cracks on stripped fiber with superb tensile force.
Stripping length of the fiber can be up to 28.0mm. To keep the equipment’s optimal
performance, thoroughly understanding and memorizing the instructions is extremely
important for proper use.
Also, wipe the fiber clean with soft cloth or cotton moistened with alcohol.
Be careful not to soak this equipment in any kind of liquid.
Keep it clean all the time as it is vulnerable to humidity and dust.
Keep and use it at room temperature as deformation can be happened due to high
temperatures.
Be careful to use the product as a breakdown can be happened due to vibration and
shock.
When cleaning the product, do not use any organic solvent such as acetone other
than alcohol on any of the rubber parts.
Fiber diameter 125㎛
Cable diameter 250㎛, 900㎛
Cleaved length Max 28.0 ㎜
Heating time 0 ~ 15 sec
Temperature range 60 °C ~ 150 °C
Tensile force after stripping 4kgf