Owners Manual

10
Product outline
3.1 Function buttons
Button Description
Press and hold about 1 second to turn the power ON/OFF.
Press and hold about 1 second when power is on and splicer
turns off.
Move the cursor to the left.
Move fiber on manual mode and adjusts camera’s focus.
It loads stripping popup menu.
Move the cursor to the right
Move fiber on manual mode and adjusts camera’s focus.
It loads VFL (Shortcut)
Move the cursor upwards.
It selects each motor on manual mode.
It loads splice popup menu.
Move the cursor downwards
It selects each motor on manual mode.
It loads heater popup menu.
Initialize the splice function.,It goes back to the menu screen.
Complete a selection
It goes to the next step on the menu screen.
Splice execution.
It goes back to the initial screen. It initializes splice function.
Turn on the stripper.,When it is ON, the lamp on the left is in red.
Press once more when it is ON and the heater is turned off.
Turn on the heater.
When it is ON, the lamp on the left is in red.
Press once more when it is ON and the heater is turned off.