Cut Sheet

ManualsBrandsUCL Swift ManualsDatacom ToolsFusion Splicer Kt, Integrated 5 Function in One Unit

ARC FUSION SPLICER

Specification

Standard Package

CATEGORY

Fiber alignment

Fiber count

Fiber setting and cleaved length

Typical splice Loss

Splicing time

Sleeve heating time

Storage of splice result

Operating condition

Dimension

Viewing method and display

Power supply

Electrode life

Applicable type of fibers

Applicable fiber dimensions

Splicing modes

Return loss

Splice loss estimate

Applicable protection sleeve

Tension test

Storage condition

Weight

Fiber view and magnification

No. of splice cycles with battery

Terminals

IPAAS Clad to Clad Alignment

Single fiber

5mm to 16mm

SM: 0.02dB, MM: 0.01dB, DS:0.04dB, NZDS: 0.04dB

Typical 7sec with SM

Typical 13sec with IS-60 mode, IS-60 sleeve

Data : 5,000ea Up to, Image : 5,000ea Up to

Altitude : 0 to 5,000m above sea level,Temperature : -10 to 50deg C, Wind : 15m/sec

Humidity : 0 to 95% RH, non-Condensation, dust proof, water proof, shock proof

132(W) x 212(L) x 73(H)mm (Without rubber protector)

2 AXIS Two CMOS cameras with 3.5-inch color LCD monitor

Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger

3,000 splices

0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable

Cladding diameter : 125㎛, Coating diameter : 150㎛~3mm

Splice mode: 300, Heat mode: 100

> 60dB

Available

60mm, 40mm and micro sleeves

1.96N to 2.25N

Temperature: -40℃~80℃, Humidity: 0~95%

1.5kg(Including battery)

X/Y : 110X , Max :220X

Typical 200 cycles

USB

DESCRIPTION

Option Package

Design, standard/optional package and specification shown

above are subject to change with or without notice.

Screw driver 3300 1