Cut Sheet

Benefits and Features

ARC FUSION SPLICER

Stripping

(No Cracks on Fiber)

CleavingCleaning

Active V-Groove Alignment

On a Telephone poleSOC/Pigtail

Optimized to

Access Network & FTTH installation

Compatible with SWIFT Fusion Splice-On Connec-

tor(FSOC)

full compliance to industry standard, allowing conve-

nient field termination and assembly with minimum

loss rate and maximum tensile force once assem-

bled.

Integrated 5 Function in One Unit

(Thermal stripper without crack on fiber, alcohol

dispenser, built-in automatic cleaver, splicer and

sleeve heater)

Active V-Groove Alignment : Clad to clad with

maximum accuracy in alignment.

PAGE 1
ARC FUSION SPLICER Active V-Groove Alignment Optimized to Access Network & FTTH installation Benefits and Features Integrated 5 Function in One Unit (Thermal stripper without crack on fiber, alcohol dispenser, built-in automatic cleaver, splicer and sleeve heater) Active V-Groove Alignment : Clad to clad with maximum accuracy in alignment.
PAGE 2
ARC FUSION SPLICER Specification CATEGORY DESCRIPTION Fiber alignment IPAAS Clad to Clad Alignment Applicable type of fibers 0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable Fiber count Single fiber Applicable fiber dimensions Cladding diameter : 125㎛, Coating diameter : 150㎛~3mm Fiber setting and cleaved length 5mm to 16mm Splicing modes Splice mode: 300, Heat mode: 100 Typical splice Loss SM: 0.02dB, MM: 0.01dB, DS:0.04dB, NZDS: 0.