User's Manual

Figure 10 An example of Pen Scrolling
Enabling Pen Scrolling
To enable Pen Scrolling , make sure one of Barrel Buttons has been set to trigger the
mouse command Middle Click. Let us call this button Scroll Button. We recommend
using Barrel Button 1, the button closer to Pen Tip, as Scroll Button. You may verify or
change this setting by calling out the Button Configuration Page of the Tablet Driver
through tapping on the Tablet Icon ( ) in the system Task Bar, usually located at the
lower right corner of the screen, or through the Control Panel.
Pen Scrolling requires Windows 95 OSR2 Edition or up, and also requires the support of
the application controlling the scrolling window. To find out if Pen Scrolling is supported,
try using it after making sure both the Tablet hardware and Tablet Driver have been
installed properly, and also Pen Scrolling has been enabled as described above.
Using Pen Scrolling