User's Manual

If a particular application does not seem to provide pressure sensitivity when the above
tests indicate otherwise, please verify also that the application has been installed and set
properly, and that the application does support Wintab interface. Some applications may
require you to explicitly turn on pressure sensitivity support, or it may limit the number
of pressure levels supported.
Note: The Cordless Mouse does not support pressure sensitivity.
Usage Tips
1. Tapping before You Use the Pen
Before you use a Cordless Pen, after you have not used it for several
minutes, tap the Pen on any surface to "wake" up the Cordless Pen. Or,
whenever the Pen seems not responding, tap it on any surface. This is
because a Cordless Pen would turn itself off to save energy after it has
not been used for several minutes. This action is not necessary for a
Corded Pen.
Similarly, for a Cordless Mouse to be used with a Pen Device, always
press the Left Mouse Button before attempting to use it.
2. Focusing on the Screen
When you write or draw with a Pen Device, try not to look at Tablet
Plate. Focus your eyes on the screen instead. After a little practice, you
will get more fun and higher efficiency because, with a pen, it is easier to
concentrate on the text or picture you are working on.
3. Double Tapping
For best results, when you double tap with a Pen (equivalent to double
click on a mouse), try to keep Pen Tip on the surface of Tablet Plate, or at
least try to lift Pen Tip as little as possible before the second tap. This
would reduce the deviation between the positions of the two taps.
4. Storing a Cordless Pen Properly
To store a Cordless Pen, make sure that the Tip does not touch
anything. Especially do not stand the Pen on a surface with the tip