User's Manual

UBTECH Sensor-controlled safety sign USER MANUAL

UBTECH ROBOTICS CORP LTD

for example safety, fault and son on

Intrusion

detection

If any intrusion is detected through the

movement and dumping of Sensor-controlled

safety signs, the equipment shall be informed

to stop disinfect in time

Sensor-

controlled safety

sign State

Indicator

Through the LED or buzzer to indicate the

status of the Sensor-controlled safety sign

itself, such as pairing, low power, etc

Bluetooth pairing Bluetooth pairing feature on Web

4.1 Caution

• Alert people who want to enter the disinfection room with a striking Sensor-controlled

safety sign "caution, UV infection do not enter!"

• The size of the Sensor-controlled safety sign is "524 (L) * 322 (W) * 752 (H) mm",

which can prevent people from bypassing the Sensor-controlled safety sign and

entering the room to be disinfected; the Sensor-controlled safety sign is 2.2kg, and

its weight can avoid shaking itself

4.2 Switch

The Sensor-controlled safety sign has several switches, which are described as follows:

• Sensor-controlled safety sign switch (toggle switch on / off). The switch of the main

power supply of the Sensor-controlled safety sign. Power on after opening. At this

time, the Sensor-controlled safety sign only indicates the status of the disinfection

equipment that has been paired successfully

•

Intrusion detection switch (tap switch mode)

 Press and hold for 3 seconds, and the buzzer will sound three times to turn on

the intrusion detection. At this time, the Sensor-controlled safety sign has the

ability to send touch alarm

 Long press for 3 seconds and the buzzer will sound to turn off the intrusion

detection

• Paired mode switch (tap switch mode). Press three times continuously (interval <

0.5s), the Sensor-controlled safety sign will enter the pairing state, and the

disinfection equipment will scan, select and match in the setting interface

4.3 Intrusion detection and disinfection device state

indicator

•

Intrusion detection. When the Sensor-controlled safety sign is detected to be moved,