User manual

第五步：放平机器人手臂，点击“添加”按钮；
第六步：抬起机器人手臂，点击“添加”按钮，“挥手”动作创建完成。
第七步：结束添加，点击“播放”按钮即可让机器人表演刚刚创建的“挥手”动作。您也可以根据自己的想像，为机器
人创建更多的动作。
第八步：点击“保存”按钮，为创建的新动作命名，然后确认保存。保存完成后，动作会存储到“动作”目录下“我的新
建”中，下次使用时可以直接从中点选。
*因 APP 版本不断更新，本手册中的界面图片仅作示意，具体情况以实际使用的 APP 为准。
06 Follow Me to Create New Actions
Remote control, actions, create new actions, save, initial actions, add actions, stop, and play
The Alpha 1 app will provide you with an action programming function for mobile phones. You can also use a mobile phone
to create new actions for Alpha. Now, create a simple “Hand Wave” action by following our steps below.
Step 1: Click “+” button on the “Alpha 1” app that is installed and enter the “Create Action” page.
Step 2: Hold Alpha’s backpack with your hands and click “Add Action”. Then, Alpha will enter into the action creation
mode.
Attention: All joints of Alpha now will begin to become relaxed, possibly causing Alpha to fall down. You should hold
Alpha’s backpack to avoid damage caused by falls.
Attention: Do not use too much force when adjusting Alpha’s joints to avoid damage.
Step 3: Help Alpha stand up by holding his backpack and click “Add”.
Step 4: Lift Alpha’s arms up and click “Add”.
Step 5: Lay Alpha’s arms flat and click “Add”.
Step 6: Lift Alpha’s arms up and click “Add” to create a “Hand Wave” action;
Step 7: Stop adding and click “Play”. Alpha can now perform the “Hand Wave” action just created. You can also create
more actions for Alpha with your imagination.
Step 8: Click the “Save” button to name the newly created action and confirm that it is saved. After saving, the action will
be saved into “My New Actions” under “Action”. Next time, you can directly select and click it to use it.
* The screenshots shown in this guide are for reference only as the app will be continually upgraded. Specific situations
shall be subject to the app currently in use.
PC 端动作编程软件
Action Programming Software for PC
想要更酷的动作创建体验，快使用 PC 端动作编程软件吧！
PC 端动作编程软件支持 Win XP、Win 7、Win 8、Win10 及 Mac 系统，请在“www.ubtAlpha.com”的“服务与技术”频
道下载。
PC 端动作编程软件的四大亮点：
添加音乐：根据音乐创建动作；动作创建：调节机器人关节 创建动作；3D 仿真编辑：未连接机器人时进行简单动
作编辑；动作仿真演示：未连接机器人时
预览已创建的动作。
让我们开启机器人的神奇之旅吧
To create cooler actions, use the action programming software for PC.
The action programming software for PC supports Win XP, Win 7, Win 8, Win 10, and Mac systems and can be downloaded
under “Service and Technology” from www.ubtAlpha.com.
Four highlights of the action programming software for PC:
(1) add music: create actions based on music;
(2) create actions: create actions by adjusting Alpha’s joints;