User manual

Accessory Charger:
·Equipped with a built-in 7.4V battery that is not detachable and irreplaceable.If damaged,
please contact our Customer Service Department for repairs.
·The charger should be used by an adult or under adult supervision.
·Regularly check the charger wire, plug, housing,and other components for damage. If
damage is found, please discontinue use until repaired or replaced.
·Alpha is only compatible with the recommended charger(100V-240V input, 9.6V 2A output).
·You may use a damp cloth to wipe the surface of Alpha. Please disconnect him from the
charger before cleaning.
03 Servo distribution of the robot
Servo distribution:
In Alpha 1 Pro, there are 16 servos in total, which is equivalent to the number of joints in humans.
Every servo has a fixed ID that corresponds to each joint as shown in the figure. The turning angle
and speed ofthe relevant joints can be controlled by operating the corresponding servos. This
allows Alpha to move in a highly precise way, cope with various dazzling stunts, and realize
humanoid simulation.
04 Operating Alpha
Power On/Off:
Power on: Press and hold “ON/OFF” for about 3 seconds. If the LED light in Alpha's eyes is blue,
then he has successfullybooted. Alpha will also appear to stand with both legs together and both
arms stretched out (as shown in the follow figure).
Power off: Press and hold “ON/OFF” for about 3 seconds. If the LED light in Alpha's eyes goes out,
then he has successfully shut down.
Note: In reset mode, the movement range is relatively wide. Please hold Alpha's backpack to avoid
falls. After booting, do not force Alpha to move, as this will cause damage to joints already in
operation.
Reset position:
Front view, Side view
An Alpha series robot may be remotelycontrolled through the mobile phone app. For expanded
functions, users can download various actions and apps, and create new actions for Alpha through
the action programming software for mobile app or PC.
The action programming software for mobile app and PC can be downloaded through the following
ways:
Important:
Mobile APP helps you better operate the Robot.Please scan the QR code onthe user manual
cover,or search "Alpha 1" in Apple APP Store and Google Play to download and install the APP.