User manual

01 Package Contents
Robot, User Guide*1, Download cable*1, Charger or adapter*1
Product parameters
Product dimension: 401x208x124(mm)
Product weight: 1.71kg
Working voltage: DC6.8VDC9.6V(Standard: 7.4V)
Working current: 1A3A
Battery capacity: 2200mAh
Audio: 4 3W
Connection: 1) Mini USB port: USB 2.0
2) Micro TF card port: 128MB32GB
3) Communication port: Dual mode Bluetooth 3.0/4.0 BLE+EDR
Servo parameters: 1) Output torque: DC6.5V: 8kg·cm, DC8.5V: 12 kg·cm
2) Running speed: DC6.5V: 0.238S/60°, DC8.5V: 0.198S/60°
Working temperature: -5℃~85
02 Parts and Components
LED eyes, LED ears, Speaker, LED Power,
Controller:
The mainboard is stored in Alpha's chest with operation buttons on his back. The mainboard serves
as his brain, which controls and coordinates all his joints allowing them to move simultaneously.
The human-robot interaction is done through the control panel on the mainboard, which contains an
external power interface, a power switch, a USB port, and a "EM.STOP" button. Their positions are
shown below.
Servo:
The servo can feedback information such as moment of force, electric current, temperature and
angle based on the ordersof the controller, can more precisely reach the designated angle and
respond to the control command more quickly. The servo is equivalent to a man's joints
whenmaking the robot move, which embodies a great dealof precision parts. Please keep protect it
well.
Battery:
The battery is located in Alpha's abdomen. It is a special large-capacity li-ion battery with a built-in
over-charge and over-discharge protection circuit.
Charging:
Before using Alpha, make sure is fully charged. Insert one end of the adapter to the charging port
labeled " " and connect the other to a 220V /110V AC power socket.
When the charging indicator turns red, it indicates that Alpha is being charged. When charging is
completed, the indicator will turn green, which indicates that the battery is fully charged. Please pull
the adapter out of the charging port. Alpha can be debugged when charging.