User's Manual

Innovator CU250ATD, 250 Watt Transmitter System Alignment
Instruction Manual, Rev. 0 23
The center frequency for the second stage is 41.5 MHz. Adjust R25 for the best depth of
frequency response correction at 41.5 MHz. C15 may need to be adjusted to attain best
depth at 41.5 MHz.
The center frequency for the third stage is 44 MHz. Adjust R26 for the best depth of
frequency response correction at 44 MHz. C16 may need to be adjusted to attain best
depth at 44 MHz.
After the three delay attenuation equalizers have been adjusted, fine tune, as needed, for
the best frequency response across the channel.
The transmitter is now set up and ready for normal operation.
If a problem occurred during the set up, help can be found by calling Axcera field support
at 724-873-8100.