User's Manual

Innovator CU250ATD, 250 Watt Transmitter Front Panel Screens Description
Instruction Manual, Rev. 0 17
Table 10: Modulator Status Screen
This menu indicates if the modulator has an SMPTE-310 signal input coming from the
demodulator. This menu only provides status information and no adjustments are
available.
This menu indicates if the Phase Lock Loop A in the modulator is locked. This
menu only provides status information and no adjustments are available.
This menu indicates if the Phase Lock Loop B in the modulator is locked. This
menu only provides status information and no adjustments are available.
Table 11: IF Processor Screen
This menu indicates whether there is a signal present to the IF processor from the
modulator. This menu only provides status information and no adjustments are
available.
This menu indicates if the IF Signal to the IF Processor has modulation. This
menu only provides status information and no adjustments are available.
Table 12: AGC Status Screen
This menu indicates if the AGC circuit has an input. This menu only provides status
information and no adjustments are available.
This menu indicates if the AGC circuit is operating within its range. This menu
only provides status information and no adjustments are available.
This menu indicates if the AGC circuit is operating in Auto or Manual. This menu
only provides status information and no adjustments are available.
This menu indicates the Auto ALC voltage setting. This menu only provides
status information and no adjustments are available.