User's Manual

Innovator CU5-1800BTD/BRD ATSC Transmitter/ Initial On Site
Regenerative Translator Turn On Procedure
Instruction Manual, Rev. 0 34
Table 11.4.3: Upconverter LO Frequency Selection Screen (BTD/BRD)
The transmit channel LO Frequency should not be changed, unless the system
is being converted to a new frequency with an Offset. NOTES: Changes should
only be made while the system is in standby. Contact Axcera Field Service at
1-724-873-8100 before changing values on this menu.
This is the final Set Up Sub Menu. Push the LEFT Arrow to go back the Main
Upconverter Set Up Screen. Push the LEFT Arrow again to go back the Main
System Set Up Screen. Push the left arrow again to go to the RF Power screen.