User's Manual

Innovator CU5-1800BTD/BRD ATSC Transmitter/ Web Ethernet
Regenerative Translator Interface Description
Instruction Manual, Rev. 0 41
The Reset Ethernet TCP Configuration Screen, in the Set Up Menus on the LCD
Display allows the user the option of resetting the TCP Configuration for the
Ethernet. The Yes or No selection can be changed by pushing the Up or Down
Button. After the selection has been made, the user needs to depress the right
or left arrow and then the display will ask “PUSH ENTER TO ACCEPT CHANGES”.
If the ENTER button is depressed, the change will be accepted. If any other
button is depressed, the change will not be made. If Yes is selected on the
screen, and accepted, the TCP Configuration will reset to the Default TCP
Configuration.