User's Manual

Innovator CU5-1800BTD/BRD ATSC Transmitter/ Initial On Site
Regenerative Translator Turn On Procedure
Instruction Manual, Rev. 0 31
Table 11.1: Chassis Values Main Set Up Menu Screen (BTD/BRD)
This is the System Set Up Chassis Values Main Sub Screen. Push the ENTER button to
access the Chassis Values submenus or push the DOWN Arrow to view the next Set Up
Main Sub Screen, which is the Set Up 8VSB Demodulator Main Sub Screen. NOTE:
Refer to the description in Table 11B for how to change the values on the following
set-up screens.
Table 11.1.1: Chassis Values Forward Power Set Up Screen (BTD/BRD)
This screen allows the user to increase of decrease the power output of the
System.
Table 11.1.2: Chassis Values Model Number Set Up Screen (BTD/BRD)
This screen allows the user to change the model number, if needed, due to
changes to the old model. This will activate the proper screens which are
displayed.
Table 11.1.3: Chassis Values Jump to Menu on Fault Set Up Screen (BTD/BRD)
This screen allows the user to select if the system will display, automatically
when ON is selected, the screen indicating a faulted condition when it occurs.
Table 11.1.4: Chassis Values Latch On an Input Fault Set Up Screen (BTD/BRD)
This screen allows the user to select that the system will latch the input fault if
it occurs, then if the input returns the fault will still register, by selecting ON.
Table 11.1.5: Chassis Values IF Processor Selection Screen (BTD/BRD)
This screen allows the user to select that the system has an IF Processor.
Table 11.1.6: Chassis Values Downconverter Selection Screen (BTD/BRD)
This screen allows the user to select that the system has a Downconverter.
Table 11.1.7: Chassis Values Amplifier Power Supply Voltage Screen (BTD/BRD)
This screen allows the user to select that the Power Supply Voltage.
Table 11.1.8: Chassis Values number of Amplifiers in System Screen
(BTD/BRD)
This screen indicates the current number of external amplifiers in the system.