User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD Web Ethernet
ATSC Transmitter/Regenerative Translator Interface Description
Instruction Manual, Rev. 1 53
Figure 12: Typical Manage Accounts Screen
The Innovator CXB Ethernet controller supports up to 5 different user accounts. To add or
change one of the accounts, click the Add/Change button in the row of the account you
want to modify, then enter the desired name, password, and administrator rights for the
user and click save.
NOTE: The transmitter's set up menus contain a Reset Ethernet User ID screen. This
screen allows a user to reset the first account User Name and Password. The
Yes or No selection can be changed by pushing the Up or Down Button. After
the selection has been made, the user needs to depress the right or left arrow
and then the display will ask “PUSH ENTER TO ACCEPT CHANGES”. If the
ENTER button is depressed, the change will be accepted. If any other button is
depressed, the change will not be made. If Yes is selected on the screen, and
accepted, the User name and Password will reset to the factory default of
admin / axcera.
Activate the 'Back' button to return to the main control/monitoring screen.
When you have completed using the web interface, please remember to log out via the
'logout' button at the top of the control/monitoring screen.