User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD Initial On Site
ATSC Transmitter/Regenerative Translator Turn On Procedure
Instruction Manual, Rev. 1 44
Table 11.1.11: Chassis Values Reset Ethernet User Name Set Up Screen
(TD/RD)
When the optional Ethernet Controller is present, this screen is displayed. It
is used to reset the first username / password account of the Ethernet
controller. There are a total a five accounts available on the Web. If this
operation is selected, ON, and the change accepted, only the fist username /
password account file is replaced, with the user name set to ‘admin’ and the
password set to ‘axcera’.
Table 11.1.12: Chassis Values Ethernet Address Set Up Screen (TD/RD)
When the optional Ethernet Controller module is present, this screen is used
to view or change the Ethernet TCP Address of the controller.
Table 11.1.13: Chassis Values Ethernet Netmask Set Up Screen (TD/RD)
When the optional Ethernet Controller module is present, this screen is used
to view or change the TCP subnet mask of the Ethernet controller.
Table 11.1.14: Chassis Values Ethernet Gateway Set Up Screen (TD/RD)
When the optional Ethernet Controller module is present, this screen is used
to view or change the TCP gateway (router) address of the Ethernet
controller.
Table 11.2: 8VSB Demodulator Main Set Up Menu Screen (RD)
This is the System Set Up 8VSB Demodulator Main Sub Screen that is only present in
the Regenerative Translator mode. Push the ENTER button to access the Set Up
8VSB Demodulator submenus or push the DOWN Arrow to view the next Set Up Main
Sub Screen, which is the Set Up 8VSB Modulator Main Sub Screen. NOTE: Refer to
the description in Table 11B for how to change the values on the following set-up
screens.
Table 11.2.1: 8VSB Demodulator Channels Set Up Menu Screen (RD)
This screen allows selection of the channel plan which can be changed to
either Off Air or Cable.
Table 11.2.2: 8VSB Demodulator Channel Select Set Up Menu Screen (RD)
This screen allows selection of the channel, for the channel plan selected in
the previous screen.