User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD ATSC Initial On Site
Transmitter/Regenerative Translator Turn On Procedure
Instruction Manual, Rev. 2 88
LCD Front Panel Screens
An LCD display, located on the front of the Innovator CX drawer, displays the current
operating status of the system. When the drawer is powered On, the LCD will initially
display two splash screens. The first splash screen will be displayed for a few seconds, then
the second splash screen will be displayed for a few seconds and finally the RF Power
Display default screen will be displayed. See typical examples of the screens below.
NOTE: These screens are typical examples of an operating system; your systems screens
may be different. The RF Power Display default screen will be the screen displayed if no
buttons are pushed to access other screens. While viewing the RF Power Display default
screen, pushing the Left and Right arrow buttons together will also access the splash
screens.
NOTE: In dual exciter systems, the On Air Exciter will display the operating parameters of
the system.
Implementation
The first splash screen displayed indicates the manufacturer and the model number of the
UBS-Axcera product.
Figure 48: Splash Screen #1
The second splash screen indicates the Firmware and Version Numbers of the software used
in the system. The example shown is Firmware number 1312423 Version number 6.3a/2.7.
Figure 49: Splash Screen #2
The final screen is the default screen which indicates the Forward Power and Reflected
Power for the system.
Figure 50: Splash Screen #3
The user can scroll through the following screens by using the buttons to the right of the LCD
display. Pushing and releasing the Up & Down Arrows will scroll through the Main Menus
(level 1), which are shown on the following pages and are aligned on the left side of the page.
The Sub-menus (level 2) are accessed by pushing and releasing the ENTER button. Once in
the Sub-menu (level 2), the user can scroll through the menu items (level 3) listed in the
Sub-menus (level 2) by pushing and releasing the Up & Down Arrows. The Sub-menus (level
2) are shown on the following pages, indented to be below the Main Menus (level 1).