User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD ATSC Initial On Site
Transmitter/Regenerative Translator Turn On Procedure
Instruction Manual, Rev. 2 87
LED Color Description
Green System is in Operate mode. OPR/STBY
Amber System is in Standby mode.
Green CX drawer is functioning normally.
Red
(blinking)
CX drawer Event (fault) is present.
Amber CX drawer Event (Fault) occurred, but the CX drawer is
now operating normally.
STATUS
Amber
(blinking)
CX drawer MPEG input set to internal source (with no
Events [Faults]).
Table 35: CX Exciter/Driver LED Indicators
High Power Amplifier
Figure 47: High Power Amplifier
LED Color Description
Green System is in Operate mode and operating normally. ENABLE
Amber System is in Standby mode.
Green System is functioning normally with no faults.
Red
(blinking)
A system Event (fault) is present.
STATUS
Amber A system Event (Fault) occurred, but the system is now
operating normally.
Jack Function
SAMPLE (J6) Typical sample value is 65dB down from the output
power level of the drawer. (500 Watts output power =
-8dBm sample level)
Table 36: High Power Amplifier LED Indicators
Enable LED
Status LED
Sample