User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD 8VSB ATSC Modulator
ATSC Transmitter/Regenerative Translator
Instruction Manual, Rev. 2 73
NMS Users Menu
The NMS Users menu sets the parameters required for an individual user to establish
communications with the modulator via a SNMP Network Management System (NMS).
From the User Properties menu, each NMS user can be configured with a user name,
password, Cryptographic Hash Function authentication type (SHA, MD5, none) and Data
Encryption mode (DES, AES, none) plus encryption password.
Please refer to 8VSB ATSC Parameters for the NMS Users Menu structure and parameter
values.
System Parameters Menu
The System Parameters menu displays the modulator access control, network and SNMP
parameters. It is also used for system reset and upgrades.
Please refer to 8VSB ATSC Parameters for the System Parameters Menu structure and
parameter values.
Display Alarms
This selection will display all the alarms currently active. If there are no active alarms,
the system will return to the previous menu.
Firmware Upgrade
This section allows the user to enter a URL address from which the modulator can
obtain a firmware upgrade.
Enter URL: