User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD 8VSB ATSC Modulator
ATSC Transmitter/Regenerative Translator
Instruction Manual, Rev. 2 66
User Configuration
The User Configuration page allows the user to select the M2M interface (RS232 or
RS485) and specify the address of the serial port used for machine-to-machine
communication.
Item Option
M2M Port Range: 0 .. ff Hex
M2M Interface RS485, RS232
Table 24: User Configuration Parameters
Figure 36: User Configuration
Download Config File(s)
By clicking on the Download Config File(s) box, the user can download the Modulator
Parameter File. When the Parameter File is selected, an operating system pop-up
window will prompt the user to save the file on their system – see Figure 37.
Figure 37: Download Selection