User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD 8VSB ATSC Modulator
ATSC Transmitter/Regenerative Translator
Instruction Manual, Rev. 2 62
Network Parameters
The Network Parameters page allows the user to set the network parameters for the
modulator.
Note: The modulator must be reset following a change to any of the Network
Parameters.
Item Option
Management IP Standard IP address e.g., 172.20.22.73
Management Netmask Standard netmask field e.g., 255.255.0.0
Default Gateway Standard IP address e.g., 172.20.1.1
Table 20: Network Parameters
Figure 31: Network Parameters Configuration